ATEK is a Authorized Dealer

Looking For Qualified Voice Data Companies

cisco systems

  • Altamonte Springs
    Apopka
    Aventura
    Bartow
    Bradenton
    Boca Raton
    Cape Canaveral
    Cape Coral
    Clearwater
    Cocoa
    Cocoa Beach
    Coral Gables
    Daytona
    Fort Walton Beach
    Fort Pierce
    Fort Lauderdale
    Fort Myers
    Fort Myers Beach
    Gainsville
    Hialeah
    Hialeah Gardens
    Homestead
    Jacksonville
    Jupiter
    Key West
    Kissimmee
    Largo
    Lakeland
    Miami
    Naples
    North Port
    North Miami Beach
    North Miami
    Ocala
    Orlando
    Ormond Beach
    Oviedo
    Palm Beach
    Palm Bay
    Panama City
    Palm Beach Gardens
    Palm Coast
    Pinellas Park
    Pompano Beach
    Port Orange
    Port Saint Lucie
    Pembroke Pines
    Riviera Beach
    Saint Petersburg
    Seminole
    St Pete Beach
    St. Augustine
    Sanford
    Sarasota
    Tampa
    Tallahassee
    Tarpon Springs
    Temple Terrace
    Venice
    Wellington
    West Palm Beach
    Weston
    Winter Haven
    Winter Garden
    Winter Park

 

 

     Welcome To ATEK Communications- (888) 909-2835 or (727) 547-2200

Florida Fiber Optic Cable Installations- Tampa Bay Fiber Optic Installations -Florida Fiber Installs-Tampa Bay Area Fiber Optic Cable Installations-Tampa-St.Petersburg Fiber Optic Cable Installation- OSP Fiber Cable Installations- Fiber Optic Installations- OSP Fiber Cable Installations- Fiber Optic Equipment Services-OSP Fiber Cable Installation Tampa Project Management- FTTH- Fiber To The Home

CALL (888) 909- ATEK or ( 727) 547-2200- or (561) 612-8808

 Florida Data Contractor- Florida Structured Cabling-Florida Cabling Contractor- Florida Fiber Installation- Florida Fiber Termination- Florida LAN Installation-Florida Cable Installation-Florida Cable Removal Services- Florida Data Cable Installation-Florida Cabling Contractor-Florida Structured Cabling Contractors-Florida Cabling Contractor- Florida Structured Cabling Contractors

Welcome To ATEK Communications- Leading The Industry With Florida Data Services From The Data Center To The Desktop

Call For Support- Quotes (888) 909-ATEK- Florida DAS- Wireless Installations

Contractor-Network Integration- Cabling Contractors

(888) 909- ATEK - (888) 909-2835 or MIAMI- (561) 612-8808 Florida (727) 547-2200

-DAS NETWORKS- FTTH- SINGLEMODE FIBER INSTALLATION- SINGLEMODE FIBER TERMINATION- SINGLEMODE FIBER TESTING-MULTIMODE OM1-OM 4 FIBER INSTALLATION- OM 1-OM 4 Multimode FIBER TERMINATION- COMPLETE FIBER TESTING AND CERTIFICATIONS

Our services include:

  • Design and Installation of Fiber Optic Cabling
  • Fiber Optic Termination
  • Light Interconnection Units and Fiber Shelves
  • Testing and Certifications
  • Fiber Tray and Raceway
  • Fiber Innerduct
  • Wall-mount and Freestanding Cabinets and Racks
  • Fiber Optic Fusion and Mechanical Splicing

 

Fiber Cable Engineering- Fiber Installation- Fiber Testing- Fiber Termination- DAS- Fiber Certification-OSP Fiber- Aerial Fiber- Direct Bury Fiber

ATEK Communications now offers Florida and Tampa turn key fiber cable installations, fiber cable terminatons including Tampa OSP Installations,Tampa Data Contractor EF & I turn key fiber and data cabling ,Tampa Outside Plant Installations,Tampa Fiber Optic Cable Installations, and Tampa Fiber Splicing. Our Tampa ATEK Communications offices are part of a nationwide team of OSP network installation personnel can be mobilized anytime, anywhere. These experts are backed by seasoned teams of administrators, project managers, and technicians who are equipped to handle virtually any OSP Installation project. Established relationships with leading vendors also assure the best possible service and quality equipment is provided to our customers. We can provide you with same day fiber cabling service in Tampa Fiber Cabling along with long term FTTH roll outs of data center fiber cabling. ATEK Communications now offers competitive Tampa Fiber Cabling, Tampa Fiber Installations, Tampa Fiber Cable Installations and Tampa Fiber Cable Installs at competitive local rates. Call us today at (727) 547-2200. We offer the Tampa Bay Tampa Phone Systems,Tampa VOIP Phones,Tampa Wiring and guaranteed service rates for Tampa data cabling and Tampa wiring and fiber cabling services in the Tampa Bay including all CAT 5e, CAT 6, Coax, fiber cable, fiber testing, data cabling, all at competitive rates. Our Tampa Cabling services include fiber cable installation,network cabling, fiber optic installations, residential data and smart home services and a variety of industries structured cabling & IT services for companies, chain stores -or any organization. ATEK can assist a Tampa based chain, hospital , govenment agency or companies with multiple locations, such as franchises, drug stores, retail stores through our field offices and affiliated BICSI certified Tampa installers. All our technicians are fully versed in data cabling standards, and fiber optic distribution designs, testing, repair and installations. We have been serving the USA for over 20 years in phone system installtions,data contractor services and system integrationr specializing in quality network cabling and fiber optic cable installations. Our offices are located in Clearwater and Tampa, Florida and are fully insured and use trained and certified technicians fully versed in BICSI standards, EIA/TIA industrynetwork certications. All our cabling and wiring work is guaranteed and available at the lowest market price.

ATEK Communications offers National Service & Experience at a LOCAL PRICE in Tampa Bay-Orlando to Ft. Myers- Panama City To Miami and Key West

ATEK provides DAS Installation, FTTH- FTTX- EF & I Turn key Fiber Design and Installation along with quality commercial network cabling and residential cabling-

Call (727) 547- 2200 - (888) 909-2835

Our Tampa Bay Area Offices are part of a nationwide team of data contractors and network installation personnel that can be mobilized anytime, anywhere and will provide you with structured cabling, network cabling, telephone systems, fiber optic cabling, testing & certification and much more at a very competitive price.

Our data and network experts are backed by seasoned teams of administrators, project managers, and technicians who are equipped to handle virtually any project. Established relationships with leading vendors assure the best possible service to our customers.ATEK Communications can provide your company with experienced data contracting services including OSP fiber optic services to telephone system installations including many systems listed below. In addition to system sales and installations, we also provide leasing and rental services as well as maintenance contracts. Furthermore, we regularly include discounts for customers that trade in their old systems when up dating or upgrading to newer and better systems.ATEK Communications also can arrange to supply interconnect services to IT departments with Field Service PBX & telephone key system technicians.

Tampa Offices (727) 547-2200 or Tollfree (888) 909-2835

 

ATEK Communications has been providing Tampa with fiber cable installation, fiber cable termination and fiber testing for over 20 years and can provide local fiber and data contracting services with a national footprint. We are also a system integrator specializing in DAS_ Distributed Antyenna Syetems and can provide complete turn key end to end EF & I - Engineering furnishing of equipment and installation and certificdation services. We have office throughout the USA and are part of a nationwide team of fiber optic cable installers offering Tampa Fiber Optic Cable Installation,Tampa Fiber Optic Contractors,Tampa Fiber Optic Installers, Tampa Fiber Optic Installation, Tampa Fiber Switch Installation, Tampa System Integrator services. ATEK also offers on-site network integration & system integration personnel that can be mobilized anytime, anywhere in the US and abroad Internationally. ATEK specializes in all areas as a fiber optic cable installer of both OSP fiber optic cable installations- or underground fiber cable- to backbone structured cable fiber optic cable installations. ATEK also offers the ability to tie in the fiber optic cable installations to the Network Integration side of your cable plant through the use of fiber optic patch panels, fiber optic tranceivers or fiber optic multiplexers that migrate the fiber optic light signals into recognizable data streams for copper based switches. ATEK can take any signal from a T1 to OC-12 to OC 192 from the central office to the desktop. We can offer you design or design- build services at affordable rates. Our network integration specialists are backed by seasoned teams of administrators, project managers, and technicians who are equipped to handle virtually any nework installation project.

(888) 909- ATEK -SINGLEMODE FIBER INSTALLATION- SINGLEMODE FIBER TERMINATION- SINGLEMODE FIBER TESTING-MULTIMODE OM1-OM 4 FIBER INSTALLATION- OM 1-OM 4 Multimode FIBER TERMINATION- COMPLETE FIBER TESTING AND CERTIFICATIONS

AT ATEK we ensure that the fiber optic cabling system design, components, and workmanship comply with the standards and practices of BICSI. These standards and practices are elaborated in the Telecommunications Distribution Methods Manual, the EIA/TIA Telecommunications Building Wiring Standard, The National Fire Protection Assn., and the National Electrical Code (NFPA-70).

Our fiber optic certifications, extensive experience on fiber optics installation, and knowledge of fiber optic technologies and standards are key factors in our successful delivery of fiber network solutions. leading fiber optic suppliers. Together we can deliver the solution that best meets your application needs, now and long term.

ATEK Communications has recently teamed up with one of our national partners to roll out a 750 nursing home DAS wireless network. The fiber backbone was installed then ethernet sent to the nursing stations using media converters to CAT6 cable and to WAP's throughout the facilities. Please call (888) 909-ATEK for more information

Whether you require CAT 5e-CAT6 Cabling -Fiber Cabling-FIber Testing- Fusion Splicing - Emergency Restoration-Coax -Broadband cable for Tower Cell cabling to DAS Wireless to OSP- Outside Plant-Trenching and Directional Boring- We have technicians located throughout the USA that can do the project on time and on budget. We also have IT Cisco CCNA, RCDD's and phone system engineers on staff to help you.

We have local crews and can offer competitive rates to meets your financial needs. We will do our best to meet or beat all local rates offered by reputable companies.

Distributed Antenna Systems-Das Installation-Das Installers

 

Our services include:

  • Design and Installation of Fiber Optic Cabling
  • Fiber Optic Termination
  • Light Interconnection Units and Fiber Shelves
  • Testing and Certifications
  • Fiber Tray and Raceway
  • Fiber Innerduct
  • Wall-mount and Freestanding Cabinets and Racks
  • Fiber Optic Fusion and Mechanical Splicing

Our certified RCDDs a nd LAN/WAN Specialists work closely with contractors and end users to deliver the latest cabling technologies that best suit the needed applications

All fiber optic cabling system designs are reviewed and installations quality checked by a Registered Communications Distribution Designer (RCDD). This is a professional designation of the Building Industry Consulting Services International (BICSI).

On & Offsite Service


ATEK Communications service comes with a guarantee of quality and a commitment to support. Because we feel so strongly about professionally serving our clients, we offer on and offsite services designed to meet your needs:

Onsite-Project Management-IT Services-Installations

  • ATEK has Available- 24-hour, 7-day a week dispatching by field-trained support staff
  • ATEK Professional and helpful technicians who arrive on time and in uniform
  • ATEK Provides Customized software available that allows you to monitor and document progress in real-time and at your convenience
  • ATEK will provide Short- or long-term onsite IT Sevices and project management-that frees up your staff

Offsite-Project Management-IT Services-Installations

  • ATEK has available 24-hour, 7-day a week dispatching by field-trained support staff
  • ATEK's Help Desk services available- 24/7 services available
  • ATEK's Level I support for immediate solutions on a remote basis
  • ATEK's Level II support includes remote solutions and dispatched technicians
  • ATEK'sLevel III support with a technician dispatched to your location
  • ATEK's Level IV support with supervisory-management responsibilites

We ensure that the fiber optic cabling system design, components, and workmanship comply with the standards and practices of BICSI. These standards and practices are elaborated in the Telecommunications Distribution Methods Manual, the EIA/TIA Telecommunications Building Wiring Standard, The National Fire Protection Assn., and the National Electrical Code (NFPA-70).

ATEK Communications has BICSI certified installers fully versed in fiber optic distribution designs and installations for a wide range of fiber optic network applications. We can help you integrate data and telecommunication networks over fiber effectively .

Our certified RCDD, Certified Network Specialist and BICSI Technicians work as team to bring the latest fiber optic technologies to our customers. We provide design, installation , and certifications of fiber optic cabling systems in central offices, POP sites, commercial, and residential sites.

ATEK Communications, a system integrator with offices in California and Florida are part of a nationwide team of network integration and system integration personnel that can be mobilized anytime, anywhere in the US. ATEK specializes in all areas of Network Integration from the central office to the desktop. We can offer you design or design- build services at affordable rates. Our network integration specialists are backed by seasoned teams of administrators, project managers, and technicians who are equipped to handle virtually any nework installation project. We can provide your company with complete OSI level 1-7 services including structured cabling services to DSL, wireless, VOIP , and installation of firewalls.Our established relationships with leading vendors also assure the best possible service and quality equipment is provided to our customers.All CAT 5e and CAT 6 & fiber optic cabling system designs are reviewed by our project managers and quality control engineers and installations quality checked by a Registered Communications Distribution Designer (RCDD).

Our certified RCDDs and LAN/WAN Specialists work closely with contractors and end users to deliver the latest cabling technologies that best suit the needed applications.

All fiber optic cabling system designs are reviewed and installations quality checked by a Registered Communications Distribution Designer (RCDD). This is a professional designation of the Building Industry Consulting Services International (BICSI).

-- --

We ensure that the fiber optic cabling system design, components, and workmanship comply with the standards and practices of BICSI. These standards and practices are elaborated in the Telecommunications Distribution Methods Manual, the EIA/TIA Telecommunications Building Wiring Standard, The National Fire Protection Assn., and the National Electrical Code (NFPA-70).

Our fiber optic certifications, extensive experience on fiber optics installation, and knowledge of fiber optic technologies and standards are key factors in our successful delivery of fiber network solutions. leading fiber optic suppliers. Together we can deliver the solution that best meets your application needs, now and long term.

Our services include:

  • Design and Installation of Fiber Optic Cabling
  • Fiber Optic Termination
  • Light Interconnection Units and Fiber Shelves
  • Testing and Certifications
  • Fiber Tray and Raceway
  • Fiber Innerduct
  • Wall-mount and Freestanding Cabinets and Racks
  • Fiber Optic Fusion and Mechanical Splicing

Our certified RCDDs a nd LAN/WAN Specialists work closely with contractors and end users to deliver the latest cabling technologies that best suit the needed applications

All fiber optic cabling system designs are reviewed and installations quality checked by a Registered Communications Distribution Designer (RCDD). This is a professional designation of the Building Industry Consulting Services International (BICSI).

We ensure that the fiber optic cabling system design, components, and workmanship comply with the standards and practices of BICSI. These standards and practices are elaborated in the Telecommunications Distribution Methods Manual, the EIA/TIA Telecommunications Building Wiring Standard, The National Fire Protection Assn., and the National Electrical Code (NFPA-70).

WARRANTY

Our fiber optic cabling installations are supported by extended warranties that guarantees both end to end performance and application assurance for you. Our technicians are certified on every product installation that we design and are well trained on the industry structured cabling standard.

The specific standards of the EIA/TIA Building Telecommunications Wiring Standards are:

    · EIA/TIA-568A (Commercial Building Telecommunications Wiring Standard)
    · EIA/TIA-569 (Commercial Building Standard for Telecommunications Pathways and Spaces)
    · EIA/TIA-570 (Residential and Light Commercial Telecommunications Wiring Standard)
    · EIA/TIA-606 (Administration Standard for Telecommunications Infrastructure of Commercial Buildings)
    · EIA/TIA-607 (Commercial Building Grounding and Bonding Requirements for Telecommunications)
    · EIA/TIA-TSB-67 (Transmission Performance Specifications for Field Testing of UTP Cabling Systems)

 

 

BRIEF OVER VIEW OF FIBER OPTIC CABLE ADVANTAGES OVER COPPER:

• SPEED: Fiber optic networks operate at high speeds - up into the gigabits
• BANDWIDTH: large carrying capacity
• DISTANCE: Signals can be transmitted further without needing to be "refreshed" or strengthened.
• RESISTANCE: Greater resistance to electromagnetic noise such as radios, motors or other nearby cables.
• MAINTENANCE: Fiber optic cables costs much less to maintain.


In recent years it has become apparent that fiber-optics are steadily replacing copper wire as an appropriate means of communication signal transmission. They span the long distances between local phone systems as well as providing the backbone for many network systems. Other system users include cable television services, university campuses, office buildings, industrial plants, and electric utility companies.

A fiber-optic system is similar to the copper wire system that fiber-optics is replacing. The difference is that fiber-optics use light pulses to transmit information down fiber lines instead of using electronic pulses to transmit information down copper lines. Looking at the components in a fiber-optic chain will give a better understanding of how the system works in conjunction with wire based systems.

At one end of the system is a transmitter. This is the place of origin for information coming on to fiber-optic lines. The transmitter accepts coded electronic pulse information coming from copper wire. It then processes and translates that information into equivalently coded light pulses. A light-emitting diode (LED) or an injection-laser diode (ILD) can be used for generating the light pulses. Using a lens, the light pulses are funneled into the fiber-optic medium where they transmit themselves down the line.

Think of a fiber cable in terms of very long cardboard roll (from the inside roll of paper towel) that is coated with a mirror.
If you shine a flashlight in one you can see light at the far end - even if bent the roll around a corner.

Light pulses move easily down the fiber-optic line because of a principle known as total internal reflection. "This principle of total internal reflection states that when the angle of incidence exceeds a critical value, light cannot get out of the glass; instead, the light bounces back in. When this principle is applied to the construction of the fiber-optic strand, it is possible to transmit information down fiber lines in the form of light pulses.Fiber optic cable functions as a "light guide," guiding the light introduced at one end of the cable through to the other end. The light source can either be a light-emitting diode (LED)) or a laser.

The light source is pulsed on and off, and a light-sensitive receiver on the other end of the cable converts the pulses back into the digital ones and zeros of the original signal.

Even laser light shining through a fiber optic cable is subject to loss of strength, primarily through dispersion and scattering of the light, within the cable itself. The faster the laser fluctuates, the greater the risk of dispersion. Light strengtheners, called repeaters, may be necessary to refresh the signal in certain applications.

While fiber optic cable itself has become cheaper over time - a equivalent length of copper cable cost less per foot but not in capacity. Fiber optic cable connectors and the equipment needed to install them are still more expensive than their copper counterparts.

The use of fiber-optics was generally not available until 1970 when Corning Glass Works was able to produce a fiber with a loss of 20 dB/km. It was recognized that optical fiber would be feasible for telecommunication transmission only if glass could be developed so pure that attenuation would be 20dB/km or less. That is, 1% of the light would remain after traveling 1 km. Today's optical fiber attenuation ranges from 0.5dB/km to 1000dB/km depending on the optical fiber used. Attenuation limits are based on intended application.

The applications of optical fiber communications have increased at a rapid rate, since the first commercial installation of a fiber-optic system in 1977. Telephone companies began early on, replacing their old copper wire systems with optical fiber lines. Today's telephone companies use optical fiber throughout their system as the backbone architecture and as the long-distance connection between city phone systems.

Cable television companies have also began integrating fiber-optics into their cable systems. The trunk lines that connect central offices have generally been replaced with optical fiber. Some providers have begun experimenting with fiber to the curb using a fiber/coaxial hybrid. Such a hybrid allows for the integration of fiber and coaxial at a neighborhood location. This location, called a node, would provide the optical receiver that converts the light impulses back to electronic signals. The signals could then be fed to individual homes via coaxial cable.

Local Area Networks (LAN) is a collective group of computers, or computer systems, connected to each other allowing for shared program software or data bases. Colleges, universities, office buildings, and industrial plants, just to name a few, all make use of optical fiber within their LAN systems.

Power companies are an emerging group that have begun to utilize fiber-optics in their communication systems. Most power utilities already have fiber-optic communication systems in use for monitoring their power grid systems.

Single Mode cable is a single stand of glass fiber with a diameter of 8.3 to 10 microns that has one mode of transmission. Single Mode Fiber with a relatively narrow diameter, through which only one mode will propagate typically 1310 or 1550nm. Carries higher bandwidth than multimode fiber, but requires a light source with a narrow spectral width. Synonyms mono-mode optical fiber, single-mode fiber, single-mode optical waveguide, uni-mode fiber.

Single-mode fiber gives you a higher transmission rate and up to 50 times more distance than multimode, but it also costs more. Single-mode fiber has a much smaller core than multimode. The small core and single light-wave virtually eliminate any distortion that could result from overlapping light pulses, providing the least signal attenuation and the highest transmission speeds of any fiber cable type.

Single-mode optical fiber is an optical fiber in which only the lowest order bound mode can propagate at the wavelength of interest typically 1300 to 1320nm.

Multimode cable is made of of glass fibers, with a common diameters in the 50-to-100 micron range for the light carry component (the most common size is 62.5). POF is a newer plastic-based cable which promises performance similar to glass cable on very short runs, but at a lower cost.

Multimode fiber gives you high bandwidth at high speeds over medium distances. Light waves are dispersed into numerous paths, or modes, as they travel through the cable's core typically 850 or 1300nm. Typical multimode fiber core diameters are 50, 62.5, and 100 micrometers. However, in long cable runs (greater than 3000 feet [914.4 ml), multiple paths of light can cause signal distortion at the receiving end, resulting in an unclear and incomplete data transmission.

 

DATA CENTER INSTALLATIONS
DATA CENTER DESIGN -BUILD

 

 

 

DATA CENTER CLEANING
DATA CENTER REMOVAL

 

 

 

 

 

 

DATA CENTER ASSET TRACKING-RFID
DATA CENTER SERVICES

 

 

 

 

ATEK Will Provide Your Data Center With Design- Build Services- Fiber Design- Testing- Characterizations and Installations- Data Center Liquidations- Data Center Cleaning-RFID Equipment Tracking- Equipment Liquidation- Liebert Power Solutions- APC Racks In A Row

ATEK National Data Center Installation Services- Includiing All Data Canter Cabling-Fiber Optic & IT Services

ATEK is now a Tier One provider of "Rack In Row" and custom racking and power solutions for Emerson Data Center Solutions through Extron in Milpitas CA. Whether you need of the shelf rack and cooling solutions or custom data cabinet installations from 1- 100 or more cabinets, ATEK can deliver the equipment and equipment hardware. ATEK can also provide trun-key Design -Build services for your new or add ons to existing data centers. ( Many fiber products available on BIM) ATEK has been providing construction services for data center, cololcation, carrier based platforms and mission critical facilities since 1998 beginning in California and now throughout the USA. We have partnered up with data center equipment supply and removal partners in the USA ( and offshore) to provide the design, desgin build, and decommissioning of data centers. We have archtects and RCDD available to offer you you specific data center and bandwiith solutions. Whether your needs are financial in costs reduction of equipment, reduction of energy cots , incresed of bandwidth or bandwith capabiity or tracking of your equipment- through RFID tracking systems ATEK and providen those services. ATEK has teamed up with industry-leading suppliers and builders of data centers, telecommunication network facilities, emergency operations centers and similar facilities and can offer you with 24x7 operation requirements.

ATEK is a National Data Center Contractor offering Data Center Equipment Installations, Data Center Installation, Data Center Installations, Data Center Retrofit, Data Canter Demolition, National Data Center Equipment Removal Services throughout the USA. Please call us at (888) 909 -2835 for a quotation or email us for a confidential no cost quoatation.

Call us at (888) 909- ATEK

DATA CENTER LIQUIDATIONS- More Info

DATA CENTER Installations- More Info

DATA CENTER CLEANING- More Info

DATA CENTER DESIGN- More Info

RFID ASSET TRACKING- More Info

 

Data Center Installation Services - Call us if you need Data Center Racks Installed, Fiber Splicing or Fiber Terminations- Fiber Cabling OM1-OM2-OM 3-OM 4- Singlemode- CAT 5E-CAT6-CAT6A-CAT 7- Power- Cooling

Whether you need complete Data Center design services or Data Center Installation of key implementation only, ATEK offers a wide variety of installation services including:

  • Cold Aisle Containment- more info
  • Custom Cold Aisle Containment Systems- more info
  • Data Center Design
  • Data Center Design- build Services
  • Data Center Cabling Services
  • Data Center Power Cable Services
  • Water Cooled Data Cabinets- (Off the shelf or custom made by Extron in Milipitas CA offering Emerson- Knurr data center and ddata cabinet product solutions and equipment
  • Full line of Cabinets/Enclosures/Racks
  • Data Center Cable Management
  • Fiber Routing Systems
  • 10 gigabit Cabling- 40 Gigabit Cabling
  • Shielded and Unshielded Copper Cabling Solutions
  • MPO- MTP -Pre-Terminated Fiber and Copper Solutions
  • Data Center Structured Cabling
  • APC – PDU and UPS
  • Power Solutions
  • Cooling Solutions- Cold Aisle Containent Systems
  • New construction and building retro-fits
  • Emerson, Liebert, E-Systems-APC, Cisco, Panduit products
  • Also see Standards & Certifications
  • Data Center Cleaning Services

  ----

ATEK National Data Center Telecommunications, Data, Fiber Optic, Power & IT Services

National Data Contractor- National IT Services-Structured Cabling Services- Network Security-Project Management- NOW CISCO CCIE CERTIFIED- National Structured Cabling Contractors- Central Office Design & Installation-Telephone System Installation- National Rollouts - IT - Fiber Optics - Fiber To The Home- FTTH-Construction-Phone Systems- Security - Biometric Security - Fiber Optic Security

Call us at (888) 909-ATEK

ATEK has been providing construction services for data center, cololcation, carrier based platforms and mission critical facilities since 1998 beginning in California and now throughout the USA. We have partnered up with data center equipment supply and removal partners in the USA ( and offshore) to provide the design, desgin build, and decommissioning of data centers. We have archtects and RCDD available to offer you you specific data center and bandwiith solutions. Whether your needs are financial in costs reduction of equipment, reduction of energy cots , incresed of bandwidth or bandwith capabiity or tracking of your equipment- through RFID tracking systems ATEK and providen those services. ATEK has teamed up with industry-leading suppliers and builders of data centers, telecommunication network facilities, emergency operations centers and similar facilities and can offer you with 24x7 operation requirements.

We serve the mission critical facility needs of enterprise companies, internet and multi-tenant data service providers, telecom providers and government customers. Depending on customer needs, ATEK delivers projects via design, design- build or demolition and liquidation of all equipment assets.

As a business partner, we provide a variety of services including extensive design phase and preconstruction engagement. Our Development Group is equipped to assist with financing, site selection and project planning. We maintain strong, nationwide relationships with the top mission critical engineering, architecture and electrical contracting firms, as well as major equipment manufacturers, all of who are essential to our high-performance teams delivering state-of-the-art facilities.

ATEK-Your 21st Century Data Contractor- We Now Service All of the 48 States- Call Us For More Information

Please take a look at our data center removal and data center equipment removal services-here

Outside Plant Cable Testing And Cable Certificafication- More Info

Fiber Characterization FiberCertifications For New & Existing Cable Plant-More Info

Fiber Cable Testing and Certification For Commercial,Data Centers and Carriers-More Info

Das Wireless Services- More Info

Strucured Cabling Services- More Info

National Telecommunications Roll Out Services- More Info

 

Fiber To The Home - National FTTH Installations

National Data Contractor Services-National Data Rollouts- National Fiber Optic Cable Installations- National Cable Installations- We can Dispatch Technicians Anywhere In The U.S. or Overseas

  • Complete End To End IT Services
  • Comprehensive Roll-out Capabilites For National Chains With Multiple Locations
  • Turnkey Project Management For Multi-Location Companies- Let ATEK's "A-TEAM" handle all your logisticas &-installations- across the USA, Alaska, and Hawaii
  • IT Services Including Application Software Engineers
  • Design- Build- Engineering Services
  • Moves, adds and changes to telephone systems, LAN and WAN networks
  • DSL Installations
  • T-1 Installations
  • Wireless Integration
  • Firewalls
  • Routine and emergency service calls
  • OSP- Outside Plant Field Surveys
  • OSP Installations
  • OSP Directional Boring
  • New systems sales and installations
  • Annual maintenance contracts
  • Service almost any Key or PBX system
  • Voice mail systems
  • Coordination with local phone company
  • Cabling - voice, data, fiber and audio/video
  • Software upgrades
  • Video conferencing
  • Storage/warehousing services
  • Equipment brokering
  • Quick response time - two to four hours for emergency situations- We also offer immediate telephone-toll-free technical support contracts with RMAT diagnostics.
  • We will work with your company's budget to offer you a very competitive rate structure for any or all our services

 

Call Us at (888) 909- 2835 For Local Residential- Commercial- Carrier-Municipal or Government Cabling- LAN-WAN- National Roll Outs- Contractor-Network Integration- Cabling Contractors DAS- Distributed Antenna Systems

----

 

 

Our Core Business is to provide our customers a complete array of telecommunications services including: Professional IT Services ,VAR for several major network equipment manufacturers, National Cabling Contractor Services,Fiber Optic Network and cable installations, Telecommunication IT services, Voice and Data Installation, Maintenance which include Add, Moves and Changes work for most common telepone systems and computer LAN/WANnetworks.

New National Wireless- Backhaul Wireless Services

National Data Contractor- National IT Services-National Project Management-National Structured Cabling Contractors- Structured Cabling Services-Cisco Trained & Certified

National Telecommunications & IT Services

National Account Staging/Redistribution Of Equipment & Personnel
With most companies these are 'mission critical components' and ATEK offers the following:

  • Kitting-Receive shipments and equipment- ATEK will consolidate-combine-build-racking-fiber optic- equipment for your company offsite- and re-distribute to other locations for you
  • Discounted hardware-we can offer extreme discounts for all your hardware equipment including fiber optic cable, gigabit ethernet switches, routers, hubs, patch panels- patch cords.
  • Let ATEK "bundle" your equipment and installation costs under one contract- let us do all the work for you from design to installation to 24/7 warranty-network administration
  • Check for damage to any equipment during shipment
  • Record serial numbers for all equipment
  • Set up equipment in the prestage area
  • Plug/connect all equipment based on client configuration
  • Run ID-specific programming to meet client configuration
  • Install software and/or client-defined image
  • Configure system and software
  • Test systems
  • Run diagnostics and customer-provided tests, including tests of input and output devices
  • Repackage components
  • Clearly label components
  • Perform asset tag management
  • Ship to locations per client instructions

On & Offsite Service

ATEK Communications service comes with a guarantee of quality and a commitment to support. Because we feel so strongly about professionally serving our clients, we offer on and offsite services designed to meet your needs:

Onsite-Project Management-IT Services-Installations

    ATEK has available 24-hour, 7-days a week dispatching by field-trained support staff.

    ATEK has professional, helpful technicians who arrive on time and in uniform.

    ATEK provides customized software that allows you to monitor and document progress in real-time and at your convenience.

    ATEK will provide Short- or long-term onsite IT Sevices and project management-that frees up your staff.

Offsite-Project Management-IT Services-Installations

    ATEK has available 24-hour, 7-days a week dispatching by field-trained support staff.

    ATEK's Help Desk services available- 24/7 services available.

    ATEK's Level I support for immediate solutions on a remote basis.

    ATEK's Level II support includes remote solutions and dispatched technicians.

    ATEK's Level III support with a technician dispatched to your location.

    ATEK's Level IV support with supervisory-management responsibilities.

Let our experienced project managers assist you in designing the right network.

 

*Information Technology: Call us at (866) 650-DATA

National Locations:

All fiber optic cabling system designs are reviewed and installations quality checked by a Registered Communications Distribution Designer (RCDD). This is a professional designation of the Building Industry Consulting Services International (BICSI). We ensure that the fiber optic cabling system design, components, and workmanship comply with the standards and practices of BICSI. These standards and practices are elaborated in the Telecommunications Distribution Methods Manual, the EIA/TIA Telecommunications Building Wiring Standard, The National Fire Protection Assn., and the National Electrical Code (NFPA-70). Our fiber optic certifications, extensive experience on fiber optics installation, and knowledge of fiber optic technologies and standards are key factors in our successful delivery of fiber network solutions. leading fiber optic suppliers. Together we can deliver the solution that best meets your application needs, now and long term.

1***Network Cabling- Fiber Optics -Call us at (866) 650-DATA or click the chat button at the top of the page

Our Fiber Optic Services Include:

  • Design and Installation of Fiber Optic Cabling
  • Design and Installation of WDM-DWDB-CWDM- MRV Certified
  • Fiber Optic Termination
  • Fiber Optic Cable Installation
  • OSP Fiber Optic Cable Installation
  • OSP Aerial Fiber Optic Cable Installation
  • Central Office Fiber Optic Cable Installation
  • Colo- (Colocation) Fiber Optic Cable Installation
  • Light Interconnection Units and Fiber Shelves
  • Testing and Certifications
  • Fiber Tray and Raceway
  • Fiber Innerduct
  • Wall-mount and Freestanding Cabinets and Racks
  • Fiber Optic Fusion and Mechanical Splicing
  • Call us at (866) 650-DATA or (727) 547-2200 or click the chat button at the top of the page to talk to us
Our certified RCDDs a nd LAN/WAN Specialists work closely with contractors and end users to deliver the latest cabling technologies that best suit the needed applications

ATEK Communications, a proven data contractor can provide you with a complete set of structured cabling installation services. With our ongoing training through BICSI and our manufacturer partners, you are assured that our technicians adhere to all the latest EIA/TIA standards. ATEK now also offers certified CISCO CCIE network services.

This insures that you will get maximum bandwidth and performance from your cable plant. Your network is only as good as your weakest link. Remember that even if you have purchased the best cabling on the market today, it doesn't guarantee that you will get maximum performance and throughput that it was engineered for.

Your cabling must be installed by a technician who understands and adheres to all the latest EIA/TIA standards. ATEK Communications is a cabling contractor that is Leviton certified on structured cabling EIA-TIA 568 A&B Standards that provides structured cabling contracting services, network design & installation, gigabit ethernet switch installation, smart home installations,cable testing, telephone systems and Cisco CCIE network installations. See our section on cabling standards.

New England Services- Coming soon!

California Offices Northern CA (925) 944-0777

California Offices Southern CA (213) 455-0578 or (619) 573-4164

Tampa Bay - St. Pete Florida Offices (866) 650-DATA or (727) 547-2200

 

ATEK Communications, an established national data contractor and national data integrator offers the federal government, local, state and county gobernments trained, experienced government cabling systems technicians along with design-build structured cabling contractors in the USA. We also provide security clearances if needed if required- please email or call is at (888) 909-ATEK.

From California to Florida to New York and Virginia you can be sure you be be provided the most experienced fiber cable installations, fiber testing, data cabling, IT support, VOIP phone and phone system providers and data cabling contractors in the United States offering a multitude of data  communications services from design-build structured cabling infrastructure, LAN- WAN integration, long haul fiber optic cable  installation to IT support and service. ATEK Communications has offices throughout the US offers competitive regional and local data cabling rates allows us to tailor cabling and installation rates to meet your needs. ATEK has fiber optic crews specializing in fiber optic installations. Our fiber technicians are trained in intricate fiber cable installations, fiber cable terminations , fiber cable fusion splicing services and FTTH- design -build services. We have on staff BICSI trained and certified RCDD's should you need one for certifications. We have very competitive rates for our fiber optic installers. ATEK Communications has several manufacturer data contractor certifications offer you and your company "end to end" solutions for several manufacturers. Call for details at (888) 909-ATEK.

SIC Code

NAICS Code

Description

1623-12

23492

Telecommunications Wiring & Cabling

1731

235990

Includes Cable splicing, electrical, construction contractors, Cable television hookup construction contractors, Communication equipment construction contractors, Computer cable construction contractors, Electrical construction contractors, Electrical repair construction contractors, Electronic control system construction contractors, Fiber optic cable construction contractors, Highway lighting and electrical signal construction contractors, Home automation system construction contractors, Lighting system construction contractors, Sound equipment construction contractors, Telecommunications wiring installation contractors

1731-03

235310

Communications Specialization

1731-27

235310

Communications Contractors

3669-98

33429

Communications Equipment NEC - Manufacturers

3679-01

33422

Radio and Television Broadcasting and Wireless Communications Equipment - Manufacturing

4812

513322

Cellular and Other Wireless Telecommunications

4813

 

Telephone Communications except radio

4822-06

51331

Video Conferencing

4899

 

Communications Services NEC

4899-03

51339

Communications

5065-10

42169

Telephone Equipment & Systems - Wholesale

5065-14

42169

Intercommunication Equipment Systems/Service - Wholesale/Manufacturers

5065-63

42169

Telecommunication Equipment & Systems - Wholesale/Mfg

5734-02

44312

Computer Parts & Supplies

5734-07

44312

Computer & Equipment Dealers

5999-04

443112

Telephone Equipment & Supplies

7378-04

811212

Computer Wiring

7379-04

541512

Computers - Networking

7382 Security Systems Services

 

Divisions

Outside Plant Cable Testing And Cable Certificafication- More Info

Fiber Characterization FiberCertifications For New & Existing Cable Plant-More Info

Fiber Cable Testing and Certification For Commercial,Data Centers and Carriers-More Info

Das Wireless Services- More Info

Strucured Cabling Services- More Info

National Telecommunications Roll Out Services- More Info

ATEK Communications has recently teamed up with one of our national partners to roll out a 750 nursing home DAS wireless network. The fiber backbone was installed then ethernet sent to the nursing stations using media converters to CAT6 cable and to WAP's throughout the facilities. Please call (888) 909-ATEK for more information

Whether you require CAT 5e-CAT6 Cabling -Fiber Cabling-FIber Testing- Fusion Splicing - Emergency Restoration-Coax -Broadband cable for Tower Cell cabling to DAS Wireless to OSP- Outside Plant-Trenching and Directional Boring- We have technicians located throughout the USA that can do the project on time and on budget. We also have IT Cisco CCNA, RCDD's and phone system engineers on staff to help you.

We have local crews and can offer competitive rates to meets your financial needs. We will do our best to meet or beat all local rates offered by reputable companies.

Distributed Antenna Systems-Das Installation-Das Installers

New Atlanta Location Serving The Southeast- Ask About Our Biometric Security Systems (866) 650-3282 or (727) 547-2200

 

 
 
 
 
 
2013 Atek Communications, Inc. all rights reserved.