DAS Installation-DAS Installers-National Das Installation- National DAS Installers- National DAS Wireless-USA DAS Roll Outs- Cellular Backhaul- Das Fronthaul-DAS,Distributed Antenna Systems-DAS Wireless Networks- Distributed Antenna System Installation- DAS Installer-DAS Deployment- National DAS Installations-Distributed Antenna Systems- DAS Installers-DAS Wireless-DAS-Distributed Antenna Systems- DAS WIFI- Backhaul Data Service- FTTH- Fiber To The Home
Welcome To ATEK Communications- (888) 909-2835 or (727) 547-2200
ATEK Communications-
DAS Wireless- WIFI- Backhaul Data Services- Cellular Backhaul- DAS Fronthaul
DAS Installations- DAS Installers-DAS Wireless Installations- DAS Wireless Installers-DAS Installation -National WIFI Installation-National WIMAX Installation-National Point to Point Wireless Installations- National Point to Multipoint Wireless Installations- CALL (866) 909- 2835

Call For Support- Quotes
(888) 909-ATEK
  (888) 909- ATEK - (888) 909-2835 or (727) 547-2200 
-DAS NETWORKS- FTTH- SINGLEMODE FIBER INSTALLATION- SINGLEMODE FIBER TERMINATION- SINGLEMODE FIBER TESTING-MULTIMODE OM1-OM 4 FIBER INSTALLATION- OM 1-OM 4 Multimode FIBER TERMINATION- COMPLETE FIBER TESTING AND CERTIFICATIONS
ATEK Communications provides DAS installation services national distributed antenna systems and DAS, fiber backbone with wireless deployment or DAS installations on a local, regional or national scope. DAS or Distributed Antenna Systems combines a fiber cable or copper cable consisting of CAT 5e or CAT6 backbone tying in WAP- wireless access points to a switch or proprietary system. DAS WIFI deployment is becoming popular and required in many industries in all 50 states with a team of certified national wireless installers providing wireless rollouts for a full spectrum of national wireless integration services. DAS is being deployed in hospitals, nursing homes, municipalities, campus envirnments, military bases,domestic resorts, international resorts, all enabling the users wirelss communications up to 4G bandwidths using fiber cable as a backbone to deliver the needed bandwidth.
Distributed Antenna Systems (DAS)
A Distributed Antenna System, or DAS, is a network of smaller, spatially separated antenna nodes connected to the communications network. A DAS network splits the transmitted signal among several smaller antennas to provide coverage and reliability over the same area as a single cell tower antenna. DAS networks are effective in areas with difficult topography, structural impediments (e.g. buildings, or within buildings), or in locations where, for a variety of reasons, it is not optimal to build a traditional macro sites.Many buildings are unable to receive cell phone and emergency radio signals throughout their facilities. The National Fire Code has urged jurisdictions to create guidelines requiring distributed antenna systems in larger buildings so that emergency responders are able to use their radios to communicate during emergency situations. These systems allow radio signals to be received deep in the recesses of the largest and most complex facilities, and also ensure that cell phone signals are accessible for your employees, customers, and business operations. Whether you need a system for a new building or you’re retrofitting an existing building, or a national rolllout ATEK has the expertise to create the optimal wireless DAS system to fit your needs.
 |
|
 |
|

In this DAS system the building can communicate with others with a Donor Antenna |
ATEK can provide Florida and the southeast with turn key DAS solutions from turn key DAS design and engineering to Florida DAS equipment supply and Florida DAS installations, ATEK can design - build your DAS , DAS wireless, DAS WIFI,DAS wireless back haul, point to point ,FSO (Free space optics) in most areas of the USA. All
of ATEK Communications offices are part of a nationwide team of wireless network installation
personnel can be mobilized anytime, anywhere to install your National Wireless Networks,National WIFI Installation,National WIMAX Installation,National Point to Point Wireless Installations, National Point to Multipoint Wireless Installations .Wireless is now widely deployed in public areas know as hotspots. Internet WIFI applications range from cafes, campuses, resorts, airports, hotels) and residential, multi-tenant buildings and enterprise where it’s used as an alternative to a wired LAN. WiFi brings the Internet to users with wireless laptops or PDAs and soon to cell phones regardless of their location. ATEK Communications now can provide you with Mesh Networks that can seamlessly provide owners of hotels and resorts. Wireless is now being used alongside with FTTH for roll Fiber To The Home rollouts. "Fringe areas" or "fill in" locations such as pool areas, lobby areas, roadways, and any business with outdoor access can be fitted with wireless, wireless distributed access systems, wireless back haul/WIFI systems to compliment FTTH networks and standard existing wireline networks.
In today’s cellular world, poor reception in office buildings, parking garages and airports can lead to missed calls, opportunities, and loss of revenue. In our ever-increasing competitive world, employee productivity and access to key decision makers is vital to an organization’s viability, growth and longevity. The need for continuous, seamless and robust wireless coverage is critical for workers to be efficient and effective, especially in hospitals, corporate offices and campuses, universities and government. Low-quality signals, dropped connections, and lack of coverage decrease productivity, frustrate users and create churn for wireless service providers. True work mobility requires a workplace with comprehensive wireless coverage. Addressing these problems results in enhanced efficiency, productivity, and employee satisfaction which lead to business gain and revenue growth. Our In-Building Distributed Antenna Systems enhance cellular and mobile phone services enabling comprehensive 3G and 4G/LTE (Long Term Evolution) voice and data connectivity.
Distributed Antenna Systems (DAS) Services and Cellular Reinforcement include:
- Detailed RF Design
- Design includes:
- Understanding and working with the customer’s current and future wireless needs. This will provide the proper selection of equipment is recommended
- Providing a customized and strategic Distributed Antenna System design- based on several factors:
- Complete System overview
- Detailed Proposed equipment locations
- Multiple- Proposed antenna types and antenna locations
- Preliminary cable pathway determination
- Radio Frequency (RF) design parameters
- Link budget calculations based on custom design and accounting for feeder cable, splitters, couplers, and other active and passive components
- Design parameters
- Summary of system capabilities
- Provide Budgetary Pricing With Approval
- Site Survey
- Survey includes:
- Building inspection
- Roof accessibility- Must be Given Approval For Walk Through
- Require Plans and Building Inspection For Firewalls and other RF obstructions
- Data Center, MDF/ Locations for AC power, grounding and environmental controls
- Identification and/or verification of cable pathways
- Identify or verify head-end and remote equipment locations
- Donor and Coverage Antenna – determine or verify possible locations and placements
- Spectrum analysis
- Propagation analysis
- Record RF measurements to understand the current environment and propagation characteristics and comply with received signal strength indicator (RSSI) requirements in the targeted service areas
- Provide a detailed report of our findings to the customer and gurantee on time start date with our technicians
- Installation of DAS- How to Proceed
- Installation may include but not limited to:
- Equipment ordering
- Cable installation (coax, fiber, copper), termination and testing
- Equipment pre-staging and configuration
- Installation of the head-end and remote equipment
- Integration and provisioning of the head-end and remote equipment (turn-on and test)
- Detailed and Direct Coordination with wireless service providers for design approval, rebroadcast agreements and commissioning (system activation)
- Attention to details –our professional and timely cable installation, along with an aesthetically pleasing installation, removal of trash and debris off site if required.
Miles of telecommunications fiber have been installed nationwide over the last few years, much by rural telecommunication companies servicing their areas. While in many situations, a fiber deployment is viewed as competition for a wireless system, yeta rural telecom’s fiber assets can actually be a complement to its wireless network.
Here are two examples:
–Wireless Backhaul: The ability of a company to move minutes and megabytes over existing infrastructure, essentially paying themselves, can augment a rural telco’s wireless business model tremendously.
–Distributed Antenna System: Allows an existing base station to feed additional antennae’s which can be located many kilometers away.
Developing cost effective DAS networks can improve signal strength, network capacity and coverage across rural areas.
DAS solutions provide pinpoint coverage and capacity solutions for rural carriers. One example of a successful DAS solution we worked on involved a cooperative in rural Minnesota that had an extensive fiber layout across its service area. A comprehensive road re-construction project was in place that would have decommissioned both internet and wireline phone service for several weeks along a one-mile stretch. Obviously, customers’ service would have been affected during this time period.
The roadway was not yet covered by the telco’s existing 3G wireless coverage. The build-out for this area was months away. They worked with the telco to develop a DAS, placing antenna assets on a telephone pole connected via fiber to an existing 3G node B in operation over six miles away. This allowed voice and data to be functional to the subscribers along the affected roadway using a modem capable of internet and voice. The homes were able to keep dial tone and Internet, wirelessly, for the three weeks it took for the road project to be completed. A separate site or tower was not needed to be constructed and the temporary site was erected and connected to the fiber network in less than one day without a tower crew needed. Yet another great example of a successful DAS solution we worked on involved a rural telecommunications company in Nebraska servicing a less populated area on the edge of its territory. This system is currently utilizing an existing tower asset and fiber facilities that are connected to the tower, extending 3G voice and data coverage to road miles and a minimal population base, without the capital and operating costs of an additional base station. Yes, future capacity needs and population growth may warrant a node b installed on site, but at present the distributed antenna is hosted by a 3G site that is 18 kilometers away.
This marks yet another great example of utilizing wireless to find and keep a subscriber base in an area where, due to the population, it may not be the most economical to employ FTTH.
NEW NATIONAL 4 G WIRELESS ROLLOUT SERVICES- NATIONAL WIRELESS ROLLOUT SERVICES
Many rural telephone companies have existing assets that can be utilized in unique ways to leverage the success of its wireless operation. DAS is a great way for telcos to provide increased speed to market for rural wireless play; at the same time, reduce capital and operating costs.
The demand for DAS is growing. And by partnering with a wireless technology company, telcos do have options. By streamlining the complete process, they can decrease overall costs while improving network reliability.
DAS- System Design: With a proper understanding of what the systems needs to accomplish our wireless network infrastructure engineers are able to design an optimal layout of repeaters, antennas and components.. Though often overlooked, we've found a preliminary wireless system design is the most important step to eliminating unnecessary costs and determining how multiple budget line items can combine to increase the system's return on investment (ROI).We create a preliminary wireless system design based on three criteria: The wireless technologies to be designed (i.e. cell/PCS, paging, 802.11a, 802.11b/g, public safety, etc.
-
The in-building coverage area (i.e. 95% of the floor space)
-
The minimal signal strength mandated by your system performance needs. (i.e. -95 dBm).
-
The minimal signal strength mandated by your system performance needs. (i.e. -95 dBm).
The System Design utilizes advanced radio propagation modeling tools that merge the technical capabilities of every equipment solution with the real-world considerations of the indoor environment. Final drawings, produced in CAD, result in a comprehensive set of elements and plans sufficiently detailed to enable seamless execution of your entire system. We work with national CAD and DAS grid designers to provide you the design - build national services.
ATEK can offer all your national wireless network installations and can integrate your national wireless roll outs through our one stop project management. We can design - build your WIFI, wireless back haul, point to point ,FSO (Free space optics) in most areas of the USA. All
of ATEK Communications offices are part of a nationwide team of wireless network installation
personnel can be mobilized anytime, anywhere to install your National Wireless Networks,National WIFI Installation,National WIMAX Installation,National Point to Point Wireless Installations, National Point to Multipoint Wireless Installations .Wireless is now widely deployed in public areas know as hotspots. Internet WIFI applications range from cafes, campuses, resorts, airports, hotels) and residential, multi-tenant buildings and enterprise where it’s used as an alternative to a wired LAN. WiFi brings the Internet to users with wireless laptops or PDAs and soon to cell phones regardless of their location. ATEK Communications now can provide you with Mesh Networks that can seamlessly provide owners of hotels and resorts. Wireless is now being used alongside with FTTH for roll Fiber To The Home rollouts. "Fringe areas" or "fill in" locations such as pool areas, lobby areas, roadways, and any business with outdoor access can be fitted with wireless, wireless distributed access systems, wireless back haul/WIFI systems to compliment FTTH networks and standard existing wireline networks.
New Free Space Optic Installation using state of the art Lightpointe FSO and Wireless Bridge Products |
ATEK was recently awarded a national rollout for 750 wireless installations. The wireless installation consists of a fiber backbone, CAT6 to all terminals ( 50-250 per location) combined with WAP- Wireless access points throughout the various locations. ATEK has teamed up with one of their sister companies to deploy this national wireless rollout. |
ATEK offers municipal, city, town, commercial development wireless solutions. Typically all wireless nodes are back hauled to a central point via fiber cable. ATEK is well versed in this technology and is fully capable to install the antenna, towers, fiber backbone, fiber trenching,direction boring, aerial and commercial cabling in all buildings. We can offer multiple solutions from multiple manufacturer partners. |

Campus Wireless Installations- Hospitality Wireless Installations-Resort Wireless Installations- Stadium- Municipality Wireless Installations
ATEK can design- build your hybrid- outdoor-indoor wireless network.We can build any wireless network from 1 building to hundreds of acres. |
|
All ATEK Communications offices are part of a nationwide team of network installation personnel can be mobilized anytime, anywhere. These experts are backed by seasoned teams of administrators, project managers, and technicians who are equipped to handle virtually any project. Established relationships with leading vendors also assure the best possible service and quality equipment is provided to our customers. These experts are backed by seasoned
teams of administrators, project managers, and technicians who are equipped to
handle virtually any project. Laptops and competition between Internet Service Providers (ISPs) have resulted
in an increased focus on the use of RF technologies to provide data access
services. Whether you desire to web surf from your laptop while enjoying a cup
of espresso at the local coffee house or a business looking for ways to reduce
Internet access fees, you are likely asking the question, "Can I do this wirelessly?" Most laptops today come equipped with wireless network connections. However, these wireless network connections are useless unless there is a wireless service available.
We offer a complete array of wireless-WIFI Product Solutions
All ATEK Communications offices are part of a nationwide team of network installation personnel can be mobilized anytime, anywhere. These experts are backed by seasoned teams of administrators, project managers, and technicians who are equipped to handle virtually any project. Established relationships with leading vendors also assure the best possible service and quality equipment is provided to our customers. These experts are backed by seasoned
teams of administrators, project managers, and technicians who are equipped to
handle virtually any project. Laptops and competition between Internet Service Providers (ISPs) have resulted
in an increased focus on the use of RF technologies to provide data access
services. Whether you desire to web surf from your laptop while enjoying a cup
of espresso at the local coffee house or a business looking for ways to reduce
Internet access fees, you are likely asking the question, "Can I do this wirelessly?" Most laptops today come equipped with wireless network connections. However, these wireless network connections are useless unless there is a wireless service available. Laptop computers now face the same problem that cell phones face: Where's the signal?
Temporary WIFI Networks Metro-Rural Networks Hospitality Enterprise
Internet access for companies has traditionally been provided through special phone company circuits called T1s (or E1s). But local exchange companies (LEC's) have traditionally held service monopolies in their markets and as a result T1/E1 service had no competition … if you wanted high speed Internet access, you had to pay the high monthly T1 lease fees. However, competition in the phone industry has been established and as a result, competing ISPs, CLECs, WISPs, etc. have been deploying their own networks (including wireless portions) from which to offer data networking services such as high speed access as well as plain old telephone service (POTS).
As you can see, there are several markets to be served by the wireless Internet Service Provider industry (WISP). No one product can serve all the myriad of applications and as a result there are now several wireless technologies to choose from. These technologies fall into two categories: standard technologies such as 802.11 (WiFi) and 802.16 (WiMax) and proprietary technologies. Each technology has its own advantages and disadvantages. But this is not the only way to distinguish wireless technologies. Other technology differences have to deal with whether the technology is point-to-point (PTP), point-to-multipoint (PMP), or something else (ex: mesh). Each of these faces differing regulatory requirements and serves different purposes.
Point to Point Technologies: Data Backhauls
PTP technologies are useful for serving as data backhauls that serve distribution systems (xDSL, cable modems, etc) and for connecting private data networks (ex: office buildings). PMP technologies are useful as distribution systems since more than one "end point" (customer premise) is served by a single "start point" (base station).
Another key difference in wireless technologies is the geographic distance they are to serve. The term "hot spot" (referring to a small geographical area of coverage … for example, a coffee house) has entered into the standard terminology of the wireless data networking industry. But equipment useful for hot spot coverage will not accommodate the needs of the "last mile" application. A bit of a misnomer, the "last mile" has progressed to mean anything from the "last 50 meters/feet" to the "last 20 miles".
Point-to-point (PTP) RF data networking refers to the use of wireless (RF) technologies to create a data link between two … exactly two … locations. PTP wireless data networks tend to require high data throughput over long distances.
PTP is different from point-to-multipoint (PMP) in two key ways. First, PMP has more than two locations. Second, because there are more than two locations all sharing the same access media (the RF channel), the control and use of the RF channel becomes more complex.
Even within the "unlicensed" RF spectrum there are still regulatory requirements placed on the RF equipment. These regulatory requirements are typically different for PTP products than for PMP (sometimes very different). Most typically, these regulatory requirements deal with limiting the strength of the RF transmission. Just to make things more complicated, these restrictions are often placed on the RF equipment itself (TX power) and also on the combined affect of the RF equipment and the RF antenna (EIRP). PTP regulatory limits are typically higher than those for PMP products.
Wireless PTP data links typically do not require much in the way of network services. As a result, PTP devices typically operate as simple (Ethernet) bridges and leave services such as routing and traffic policing to the networks they are connecting. In a sense, a PTP wireless link becomes an invisible "cable" joining two data network devices. Without wireless technology, distances of over 100 meters typically must be served by wide area network (WAN) technologies such as T1/E1 and fiber. However, wireless data networking allows for local area network (LAN) technologies such as 10-BaseT to be used. These technologies are not only less expensive but they are more readily available as well … just about every computer now has an Ethernet network interface (NIC) port. This means that computers can be directly connected to each other using wireless PTP technology even if they are separated by many miles/kilometers.
Interconnect
Services
-
Telephone
Systems- We Service Most PBX & Key Systems
-
PBX
Installation & Programming
-
Project
Management
-
Ask
Us About Our Quality -Guaranteed Refurbished Telephone Systems - Save More Than
80% Over A New Phone System
|
ATEK Communications has recently teamed up with one of our national partners to roll out a 750 nursing home DAS wireless network. The fiber backbone was installed then ethernet sent to the nursing stations using media converters to CAT6 cable and to WAP's throughout the facilities. Please call (888) 909-ATEK for more information

|
Whether you require CAT 5e-CAT6 Cabling -Fiber Cabling-FIber Testing- Fusion Splicing - Emergency Restoration-Coax -Broadband cable for Tower Cell cabling to DAS Wireless to OSP- Outside Plant-Trenching and Directional Boring- We have technicians located throughout the USA that can do the project on time and on budget. We also have IT Cisco CCNA, RCDD's and phone system engineers on staff to help you.
We have local crews and can offer competitive rates to meets your financial needs. We will do our best to meet or beat all local rates offered by reputable companies.
Distributed Antenna Systems-Das Installation-Das Installers |
 |
 |
Telecommunications
Cost Burden Audits and Cost Savings Analysis |
 |
 |
Wide
Area Voice Connectivity and Data Integration Solutions |
 |
 |
PBX
Systems Integration and Management |
 |
 |
Voice
Over Internet Technologies and Implementation |
 |
 |
Call
Center Design, Load Balancing and Software Based Management Solutions. |
 |
 |
Unified
Voice Messaging and Management Solutions |
 |
 |
Wiring
Infrastructure Analysis and Specifications |
 |
 |
Local
Voice Service Provisioning |
 |
 |
Long
Distance Voice Service Provisioning |
 |
 |
Leased
Line and Data Connectivity Service Provisioning |
 |
Northern CA (925) 944-0777
Southern CA (619) 573- 4164 or (213) 455- 0578
Tampa - St. Pete - Clearwater, Florida (866) 650-DATA or (727) 547- 2200
ATEK Communications now offers Florida and Tampa turn key fiber cable installations, fiber cable terminatons including Tampa OSP Installations,Tampa Data Contractor EF & I turn key fiber and data cabling ,Tampa Outside Plant Installations,Tampa Fiber Optic Cable Installations, and Tampa Fiber Splicing. Our Tampa ATEK Communications offices are part of a nationwide team of OSP network installation personnel can be mobilized anytime, anywhere. These experts are backed by seasoned teams of administrators, project managers, and technicians who are equipped to handle virtually any OSP Installation project. Established relationships with leading vendors also assure the best possible service and quality equipment is provided to our customers. We can provide you with same day fiber cabling service in Tampa Fiber Cabling along with long term FTTH roll outs of data center fiber cabling. ATEK Communications now offers competitive Tampa Fiber Cabling, Tampa Fiber Installations, Tampa Fiber Cable Installations and Tampa Fiber Cable Installs at competitive local rates. Call us today at (727) 547-2200. We offer the Tampa Bay Tampa Phone Systems,Tampa VOIP Phones,Tampa Wiring and guaranteed service rates for Tampa data cabling and Tampa wiring and fiber cabling services in the Tampa Bay including all CAT 5e, CAT 6, Coax, fiber cable, fiber testing, data cabling, all at competitive rates. Our Tampa Cabling services include fiber cable installation,network cabling, fiber optic installations, residential data and smart home services and a variety of industries structured cabling & IT services for companies, chain stores -or any organization. ATEK can assist a Tampa based chain, hospital , govenment agency or companies with multiple locations, such as franchises, drug stores, retail stores through our field offices and affiliated BICSI certified Tampa installers. All our technicians are fully versed in data cabling standards, and fiber optic distribution designs, testing, repair and installations. We have been serving the USA for over 20 years in phone system installtions,data contractor services and system integrationr specializing in quality network cabling and fiber optic cable installations. Our offices are located in Clearwater and Tampa, Florida and are fully insured and use trained and certified technicians fully versed in BICSI standards, EIA/TIA industrynetwork certications. All our cabling and wiring work is guaranteed and available at the lowest market price.
Tampa Bay -St. Petersburg Florida (727) 547-2200
ATEK Communications offers National Service & Experience at a LOCAL PRICE in Tampa Bay-Orlando to Ft. Myers- Panama City To Miami and Key West
ATEK provides quality commercial network cabling and residential cabling- Call (727) 547- 2200 - (888) 909-2835
Our
Tampa Bay Area Offices are part of a nationwide team of data contractors and network
installation personnel that can be mobilized anytime, anywhere and will provide you with structured cabling, network cabling, telephone systems, fiber optic cabling, testing & certification and much more at a very competitive price.
Our data and network
experts are backed by seasoned teams of administrators, project managers, and
technicians who are equipped to handle virtually any project. Established relationships
with leading vendors assure the best possible service to our customers.ATEK Communications
can provide your company with experienced data contracting services including
OSP fiber optic services to telephone system installations including many systems
listed below. In addition to system sales and installations, we also provide leasing
and rental services as well as maintenance contracts. Furthermore, we regularly
include discounts for customers that trade in their old systems when up dating
or upgrading to newer and better systems.ATEK
Communications also can arrange to supply interconnect services to IT departments
with Field Service PBX & telephone key system technicians.
Tampa Offices (727) 547-2200 or Tollfree (888) 909-2835 
ATEK
Communications has been providing Tampa with fiber cable installation, fiber cable termination and fiber testing for over 20 years and can provide local fiber and data contracting services with a national footprint. We are also a system integrator specializing in DAS_ Distributed Antyenna Syetems and can provide complete turn key end to end EF & I - Engineering furnishing of equipment and installation and certificdation services. We have office throughout the USA and are part of a nationwide team of fiber
optic cable installers offering Tampa Fiber Optic Cable Installation,Tampa Fiber Optic Contractors,Tampa Fiber Optic Installers, Tampa Fiber Optic Installation, Tampa Fiber Switch Installation, Tampa System Integrator services. ATEK also offers on-site network integration & system integration personnel
that can be mobilized anytime, anywhere in the US and abroad Internationally. ATEK specializes in all areas
as a fiber optic cable installer of both OSP fiber optic cable installations-
or underground fiber cable- to backbone structured cable fiber optic cable installations.
ATEK also offers the ability to tie in the fiber optic cable installations to
the Network Integration side of your cable plant through the use of fiber optic
patch panels, fiber optic tranceivers or fiber optic multiplexers that migrate
the fiber optic light signals into recognizable data streams for copper based
switches. ATEK can take any signal from a T1 to OC-12 to OC 192 from the central office
to the desktop. We can offer you design or design- build services at affordable
rates. Our network integration specialists are backed by seasoned teams of administrators,
project managers, and technicians who are equipped to handle virtually any nework
installation project.
 (888) 909- ATEK -SINGLEMODE FIBER INSTALLATION- SINGLEMODE FIBER TERMINATION- SINGLEMODE FIBER TESTING-MULTIMODE OM1-OM 4 FIBER INSTALLATION- OM 1-OM 4 Multimode FIBER TERMINATION- COMPLETE FIBER TESTING AND CERTIFICATIONS
|
ATEK Communications has recently teamed up with one of our national partners to roll out a 750 nursing home DAS wireless network. The fiber backbone was installed then ethernet sent to the nursing stations using media converters to CAT6 cable and to WAP's throughout the facilities. Please call (888) 909-ATEK for more information

|
Whether you require CAT 5e-CAT6 Cabling -Fiber Cabling-Fiber Testing- Fusion Splicing - Emergency Restoration-Coax -Broadband cable for Tower Cell cabling to DAS Wireless to OSP- Outside Plant-Trenching and Directional Boring- We have technicians located throughout the USA that can do the project on time and on budget. We also have IT Cisco CCNA, RCDD's and phone system engineers on staff to help you.
We have local crews and can offer competitive rates to meets your financial needs. We will do our best to meet or beat all local rates offered by reputable companies. |
AT
ATEK we ensure that the
fiber optic cabling system design, components, and workmanship comply with the
standards and practices of BICSI. These standards and practices are elaborated
in the Telecommunications Distribution Methods Manual, the EIA/TIA Telecommunications
Building Wiring Standard, The National Fire Protection Assn., and the National
Electrical Code (NFPA-70).
Our
fiber optic certifications, extensive experience on fiber optics installation, and
knowledge of fiber optic technologies and standards are key factors in our successful
delivery of fiber network solutions. leading fiber optic suppliers. Together we
can deliver the solution that best meets your application needs, now and long
term.
Our services
include:
- Design
and Installation of Fiber Optic Cabling
- Fiber
Optic Termination
- Light
Interconnection Units and Fiber Shelves
- Testing and Certifications
- Fiber
Tray and Raceway
- Fiber
Innerduct
- Wall-mount
and Freestanding Cabinets and Racks
- Fiber
Optic Fusion and Mechanical Splicing
Our
certified RCDDs a nd LAN/WAN Specialists work closely with contractors and end
users to deliver the latest cabling technologies that best suit the needed applications
All fiber
optic cabling system designs are reviewed and installations quality checked by
a Registered Communications Distribution Designer (RCDD). This is a professional
designation of the Building Industry Consulting Services International (BICSI).
On & Offsite Service
ATEK Communications service comes with a guarantee of quality and a commitment to support. Because we feel so strongly about professionally serving our clients, we offer on and offsite services designed to meet your needs:
Onsite-Project Management-IT Services-Installations
- ATEK has Available- 24-hour, 7-day a week dispatching by field-trained support staff
- ATEK Professional and helpful technicians who arrive on time and in uniform
- ATEK Provides Customized software available that allows you to monitor and document progress in real-time and at your convenience
- ATEK will provide Short- or long-term onsite IT Sevices and project management-that frees up your staff
Offsite-Project Management-IT Services-Installations
- ATEK has available 24-hour, 7-day a week dispatching by field-trained support staff
- ATEK's Help Desk services available- 24/7 services available
- ATEK's Level I support for immediate solutions on a remote basis
- ATEK's Level II support includes remote solutions and dispatched technicians
- ATEK'sLevel III support with a technician dispatched to your location
- ATEK's Level IV support with supervisory-management responsibilites
We ensure
that the fiber optic cabling system design, components, and workmanship comply
with the standards and practices of BICSI. These standards and practices are elaborated
in the Telecommunications Distribution Methods Manual, the EIA/TIA Telecommunications
Building Wiring Standard, The National Fire Protection Assn., and the National
Electrical Code (NFPA-70).
ATEK Communications has
BICSI certified installers fully versed in fiber optic distribution designs and
installations for a wide range of fiber optic network applications. We can help
you integrate data and telecommunication networks over fiber effectively
.
Our certified RCDD, Certified
Network Specialist and BICSI Technicians work as team to bring the latest fiber
optic technologies to our customers. We provide design, installation , and certifications
of fiber optic cabling systems in central offices, POP sites, commercial, and
residential sites.
ATEK
Communications, a system integrator with offices in California and Florida are
part of a nationwide team of network integration and system integration personnel
that can be mobilized anytime, anywhere in the US. ATEK specializes in all areas
of Network Integration from the central office to the desktop. We can offer you
design or design- build services at affordable rates. Our network integration
specialists are backed by seasoned teams of administrators, project managers,
and technicians who are equipped to handle virtually any nework installation project.
We can provide your company with complete OSI level 1-7 services including structured
cabling services to DSL, wireless, VOIP , and installation of firewalls.Our established
relationships with leading vendors also assure the best possible service and quality
equipment is provided to our customers.All CAT 5e and CAT 6 & fiber optic
cabling system designs are reviewed by our project managers and quality control engineers and installations quality checked by a Registered
Communications Distribution Designer (RCDD).
Our
certified RCDDs and LAN/WAN Specialists work closely with contractors and end
users to deliver the latest cabling technologies that best suit the needed applications.
All
fiber optic cabling system designs are reviewed and installations quality checked
by a Registered Communications Distribution Designer (RCDD). This is a professional
designation of the Building Industry Consulting Services International (BICSI).
-- --
We
ensure that the fiber optic cabling system design, components, and workmanship
comply with the standards and practices of BICSI. These standards and practices
are elaborated in the Telecommunications Distribution Methods Manual, the EIA/TIA
Telecommunications Building Wiring Standard, The National Fire Protection Assn.,
and the National Electrical Code (NFPA-70).
Our fiber
optic certifications, extensive experience on fiber optics installation, and
knowledge of fiber optic technologies and standards are key factors in our successful
delivery of fiber network solutions. leading fiber optic suppliers. Together we
can deliver the solution that best meets your application needs, now and long
term.
Our services include:
- Design and Installation of Fiber Optic Cabling
- Fiber
Optic Termination
- Light Interconnection Units
and Fiber Shelves
- Testing and Certifications
- Fiber
Tray and Raceway
- Fiber Innerduct
- Wall-mount
and Freestanding Cabinets and Racks
- Fiber Optic
Fusion and Mechanical Splicing
Our certified RCDDs
a nd LAN/WAN Specialists work closely with contractors and end users to deliver
the latest cabling technologies that best suit the needed applications
All
fiber optic cabling system designs are reviewed and installations quality checked
by a Registered Communications Distribution Designer (RCDD). This is a professional
designation of the Building Industry Consulting Services International (BICSI).
We ensure that the fiber optic cabling system design,
components, and workmanship comply with the standards and practices of BICSI.
These standards and practices are elaborated in the Telecommunications Distribution
Methods Manual, the EIA/TIA Telecommunications Building Wiring Standard, The National
Fire Protection Assn., and the National Electrical Code (NFPA-70).
WARRANTY
Our
fiber optic cabling installations are supported by extended warranties that guarantees
both end to end performance and application assurance for you. Our technicians
are certified on every product installation that we design and are well trained
on the industry structured cabling standard.
The specific
standards of the EIA/TIA Building Telecommunications Wiring Standards are:
· EIA/TIA-568A (Commercial Building Telecommunications
Wiring Standard)
· EIA/TIA-569 (Commercial Building Standard for Telecommunications
Pathways and Spaces)
· EIA/TIA-570 (Residential and Light Commercial
Telecommunications Wiring Standard)
· EIA/TIA-606 (Administration
Standard for Telecommunications Infrastructure of Commercial Buildings)
·
EIA/TIA-607 (Commercial Building Grounding and Bonding Requirements for Telecommunications)
· EIA/TIA-TSB-67 (Transmission Performance Specifications for Field
Testing of UTP Cabling Systems)
BRIEF
OVER VIEW OF FIBER OPTIC CABLE ADVANTAGES OVER COPPER:
SPEED: Fiber optic networks operate at high speeds - up into the gigabits
BANDWIDTH: large carrying capacity
DISTANCE: Signals can be transmitted
further without needing to be "refreshed" or strengthened.
RESISTANCE: Greater resistance to electromagnetic noise such as radios, motors
or other nearby cables.
MAINTENANCE: Fiber optic cables costs much less
to maintain.
In
recent years it has become apparent that fiber-optics are steadily replacing copper
wire as an appropriate means of communication signal transmission. They span the
long distances between local phone systems as well as providing the backbone for
many network systems. Other system users include cable television services, university
campuses, office buildings, industrial plants, and electric utility companies.
A
fiber-optic system is similar to the copper wire system that fiber-optics is replacing.
The difference is that fiber-optics use light pulses to transmit information down
fiber lines instead of using electronic pulses to transmit information down copper
lines. Looking at the components in a fiber-optic chain will give a better understanding
of how the system works in conjunction with wire based systems.
At
one end of the system is a transmitter. This is the place of origin for information
coming on to fiber-optic lines. The transmitter accepts coded electronic pulse
information coming from copper wire. It then processes and translates that information
into equivalently coded light pulses. A light-emitting diode (LED) or an injection-laser
diode (ILD) can be used for generating the light pulses. Using a lens, the light
pulses are funneled into the fiber-optic medium where they transmit themselves
down the line.
Think
of a fiber cable in terms of very long cardboard roll (from the inside roll of
paper towel) that is coated with a mirror.
If you shine a flashlight in one
you can see light at the far end - even if bent the roll around a corner.
Light
pulses move easily down the fiber-optic line because of a principle known as total
internal reflection. "This principle of total internal reflection states
that when the angle of incidence exceeds a critical value, light cannot get out
of the glass; instead, the light bounces back in. When this principle is applied
to the construction of the fiber-optic strand, it is possible to transmit information
down fiber lines in the form of light pulses.Fiber optic cable functions as a
"light guide," guiding the light introduced at one end of the cable
through to the other end. The light source can either be a light-emitting diode
(LED)) or a laser.
The
light source is pulsed on and off, and a light-sensitive receiver on the other
end of the cable converts the pulses back into the digital ones and zeros of the
original signal.
Even
laser light shining through a fiber optic cable is subject to loss of strength,
primarily through dispersion and scattering of the light, within the cable itself.
The faster the laser fluctuates, the greater the risk of dispersion. Light strengtheners,
called repeaters, may be necessary to refresh the signal in certain applications.
While
fiber optic cable itself has become cheaper over time - a equivalent length of
copper cable cost less per foot but not in capacity. Fiber optic cable connectors
and the equipment needed to install them are still more expensive than their copper
counterparts.
The
use of fiber-optics was generally not available until 1970 when Corning Glass
Works was able to produce a fiber with a loss of 20 dB/km. It was recognized that
optical fiber would be feasible for telecommunication transmission only if glass
could be developed so pure that attenuation would be 20dB/km or less. That is,
1% of the light would remain after traveling 1 km. Today's optical fiber attenuation
ranges from 0.5dB/km to 1000dB/km depending on the optical fiber used. Attenuation
limits are based on intended application.
The
applications of optical fiber communications have increased at a rapid rate, since
the first commercial installation of a fiber-optic system in 1977. Telephone companies
began early on, replacing their old copper wire systems with optical fiber lines.
Today's telephone companies use optical fiber throughout their system as the backbone
architecture and as the long-distance connection between city phone systems.
Cable
television companies have also began integrating fiber-optics into their cable
systems. The trunk lines that connect central offices have generally been replaced
with optical fiber. Some providers have begun experimenting with fiber to the
curb using a fiber/coaxial hybrid. Such a hybrid allows for the integration of
fiber and coaxial at a neighborhood location. This location, called a node, would
provide the optical receiver that converts the light impulses back to electronic
signals. The signals could then be fed to individual homes via coaxial cable.
Local
Area Networks (LAN) is a collective group of computers, or computer systems, connected
to each other allowing for shared program software or data bases. Colleges, universities,
office buildings, and industrial plants, just to name a few, all make use of optical
fiber within their LAN systems.
Power
companies are an emerging group that have begun to utilize fiber-optics in their
communication systems. Most power utilities already have fiber-optic communication
systems in use for monitoring their power grid systems.
Single
Mode cable is a single stand of glass fiber with a diameter of 8.3 to 10 microns
that has one mode of transmission. Single Mode Fiber with a relatively narrow
diameter, through which only one mode will propagate typically 1310 or 1550nm.
Carries higher bandwidth than multimode fiber, but requires a light source with
a narrow spectral width. Synonyms mono-mode optical fiber, single-mode fiber,
single-mode optical waveguide, uni-mode fiber.
Single-mode
fiber gives you a higher transmission rate and up to 50 times more distance than
multimode, but it also costs more. Single-mode fiber has a much smaller core than
multimode. The small core and single light-wave virtually eliminate any distortion
that could result from overlapping light pulses, providing the least signal attenuation
and the highest transmission speeds of any fiber cable type.
Single-mode
optical fiber is an optical fiber in which only the lowest order bound mode can
propagate at the wavelength of interest typically 1300 to 1320nm.
Multimode
cable is made of of glass fibers, with a common diameters in the 50-to-100 micron
range for the light carry component (the most common size is 62.5). POF is a newer
plastic-based cable which promises performance similar to glass cable on very
short runs, but at a lower cost.
Multimode
fiber gives you high bandwidth at high speeds over medium distances. Light waves
are dispersed into numerous paths, or modes, as they travel through the cable's
core typically 850 or 1300nm. Typical multimode fiber core diameters are 50, 62.5,
and 100 micrometers. However, in long cable runs (greater than 3000 feet [914.4
ml), multiple paths of light can cause signal distortion at the receiving end,
resulting in an unclear and incomplete data transmission.
 |
DATA CENTER INSTALLATIONS |
|
|
DATA CENTER DESIGN -BUILD |
|
|
|
|
DATA CENTER ASSET TRACKING-RFID |
|
|
|
|
|
ATEK Will Provide Your Data Center With Design- Build Services- Fiber Design- Testing- Characterizations and Installations- Data Center Liquidations- Data Center Cleaning-RFID Equipment Tracking- Equipment Liquidation- Liebert Power Solutions- APC Racks In A Row
|
|
|
|
ATEK National Data Center Installation Services- Includiing All Data Canter Cabling-Fiber Optic & IT Services
ATEK is now a Tier One provider of "Rack In Row" and custom racking and power solutions for Emerson Data Center Solutions through Extron in Milpitas CA. Whether you need of the shelf rack and cooling solutions or custom data cabinet installations from 1- 100 or more cabinets, ATEK can deliver the equipment and equipment hardware. ATEK can also provide trun-key Design -Build services for your new or add ons to existing data centers. ( Many fiber products available on BIM) ATEK has been providing construction services for data center, cololcation, carrier based platforms and mission critical facilities since 1998 beginning in California and now throughout the USA. We have partnered up with data center equipment supply and removal partners in the USA ( and offshore) to provide the design, desgin build, and decommissioning of data centers. We have archtects and RCDD available to offer you you specific data center and bandwiith solutions. Whether your needs are financial in costs reduction of equipment, reduction of energy cots , incresed of bandwidth or bandwith capabiity or tracking of your equipment- through RFID tracking systems ATEK and providen those services. ATEK has teamed up with industry-leading suppliers and builders of data centers, telecommunication network facilities, emergency operations centers and similar facilities and can offer you with 24x7 operation requirements.
ATEK is a National Data
Center Contractor offering Data Center Equipment Installations, Data Center Installation, Data Center Installations, Data Center Retrofit, Data Canter Demolition, National Data Center Equipment Removal Services throughout the USA. Please call us at (888) 909 -2835 for a quotation or email us for a confidential no cost quoatation.
Call us at (888) 909- ATEK
Data Center Installation Services
- Call us if you need Data Center Racks Installed, Fiber Splicing or Fiber Terminations- Fiber Cabling OM1-OM2-OM 3-OM 4- Singlemode- CAT 5E-CAT6-CAT6A-CAT 7- Power- Cooling
Whether you need complete Data Center design services or Data Center Installation of key implementation only, ATEK offers a wide variety of installation services including:
- Cold Aisle Containment- more info
- Custom Cold Aisle Containment Systems- more info
- Data Center Design
- Data Center Design- build Services
- Data Center Cabling Services
- Data Center Power Cable Services
- Water Cooled Data Cabinets- (Off the shelf or custom made by Extron in Milipitas CA offering Emerson- Knurr data center and ddata cabinet product solutions and equipment
- Full line of Cabinets/Enclosures/Racks
- Data Center Cable Management
- Fiber Routing Systems
- 10 gigabit Cabling- 40 Gigabit Cabling
- Shielded and Unshielded Copper Cabling Solutions
- MPO- MTP -Pre-Terminated Fiber and Copper Solutions
- Data Center Structured Cabling
- APC – PDU and UPS
- Power Solutions
- Cooling Solutions- Cold Aisle Containent Systems
- New construction and building retro-fits
- Emerson, Liebert, E-Systems-APC, Cisco, Panduit products
- Also see Standards & Certifications
- Data Center Cleaning Services

----
ATEK National Data Center Telecommunications, Data, Fiber Optic, Power & IT Services
National Data
Contractor- National IT Services-Structured Cabling Services- Network Security-Project Management- NOW
CISCO CCIE CERTIFIED- National Structured Cabling Contractors- Central Office
Design & Installation-Telephone System Installation- National Rollouts - IT - Fiber Optics - Fiber To The Home- FTTH-Construction-Phone Systems- Security -
Biometric Security - Fiber Optic Security
Call us at (888) 909-ATEK
ATEK has been providing construction services for data center, cololcation, carrier based platforms and mission critical facilities since 1998 beginning in California and now throughout the USA. We have partnered up with data center equipment supply and removal partners in the USA ( and offshore) to provide the design, desgin build, and decommissioning of data centers. We have archtects and RCDD available to offer you you specific data center and bandwiith solutions. Whether your needs are financial in costs reduction of equipment, reduction of energy cots , incresed of bandwidth or bandwith capabiity or tracking of your equipment- through RFID tracking systems ATEK and providen those services. ATEK has teamed up with industry-leading suppliers and builders of data centers, telecommunication network facilities, emergency operations centers and similar facilities and can offer you with 24x7 operation requirements.
We serve the mission critical facility needs of enterprise companies, internet and multi-tenant data service providers, telecom providers and government customers. Depending on customer needs, ATEK delivers projects via design, design- build or demolition and liquidation of all equipment assets.
As a business partner, we provide a variety of services including extensive design phase and preconstruction engagement. Our Development Group is equipped to assist with financing, site selection and project planning. We maintain strong, nationwide relationships with the top mission critical engineering, architecture and electrical contracting firms, as well as major equipment manufacturers, all of who are essential to our high-performance teams delivering state-of-the-art facilities.
 
ATEK-Your 21st Century Data Contractor- We Now Service All of the 48 States- Call Us For More Information
Please take a look at our data center removal and data center equipment removal services-here
Outside Plant Cable Testing And Cable Certificafication- More Info

|
Fiber Characterization FiberCertifications For New & Existing Cable Plant-More Info

|
Fiber Cable Testing and Certification For Commercial,Data Centers and Carriers-More Info

|
Das Wireless Services- More Info

|
|
National Telecommunications Roll Out Services- More Info

|
Fiber To The Home - National FTTH Installations
National Data Contractor Services-National Data Rollouts- National Fiber Optic Cable Installations- National Cable Installations- We can Dispatch Technicians Anywhere In The U.S. or Overseas
-
Complete End To End IT Services
-
Comprehensive Roll-out Capabilites For National Chains With Multiple Locations
-
Turnkey Project Management For Multi-Location Companies- Let ATEK's "A-TEAM" handle all your logisticas &-installations- across the USA, Alaska, and Hawaii
-
IT Services Including Application Software Engineers
-
Design- Build- Engineering Services
-
Moves, adds and changes to telephone systems, LAN and WAN networks
-
DSL Installations
-
T-1 Installations
-
Wireless Integration
-
Firewalls
-
Routine and emergency service calls
-
OSP- Outside Plant Field Surveys
-
OSP Installations
-
OSP Directional Boring
-
New systems sales and installations
-
Annual maintenance contracts
-
Service almost any Key or PBX system
-
Voice mail systems
-
Coordination with local phone company
-
Cabling - voice, data, fiber and audio/video
-
Software upgrades
-
Video conferencing
-
Storage/warehousing services
-
Equipment brokering
-
Quick response time - two to four hours for emergency situations- We also offer immediate telephone-toll-free technical support contracts with RMAT diagnostics.
-
We will work with your company's budget to offer you a very competitive rate structure for any or all our services
Call Us at (888) 909- 2835 For Local Residential- Commercial- Carrier-Municipal or Government Cabling- LAN-WAN- National Roll Outs- Contractor-Network Integration- Cabling Contractors DAS- Distributed Antenna Systems
 ---- 
Our Core Business is to provide our customers a complete array of telecommunications services including: Professional IT Services ,VAR for several major network equipment manufacturers, National Cabling Contractor Services,Fiber Optic Network and cable installations, Telecommunication IT services, Voice and Data Installation, Maintenance which include Add, Moves and Changes work for most common telepone systems and computer LAN/WANnetworks.
New National Wireless- Backhaul Wireless Services
National Data Contractor- National IT Services-National Project Management-National Structured Cabling Contractors- Structured Cabling Services-Cisco Trained & Certified
National Telecommunications & IT Services
National Account Staging/Redistribution Of Equipment & Personnel
With most companies these are 'mission critical components' and ATEK offers the following:
-
Kitting-Receive shipments and equipment- ATEK will consolidate-combine-build-racking-fiber optic- equipment for your company offsite- and re-distribute to other locations for you
-
Discounted hardware-we can offer extreme discounts for all your hardware equipment including fiber optic cable, gigabit ethernet switches, routers, hubs, patch panels- patch cords.
-
Let ATEK "bundle" your equipment and installation costs under one contract- let us do all the work for you from design to installation to 24/7 warranty-network administration
-
Check for damage to any equipment during shipment
-
Record serial numbers for all equipment
-
Set up equipment in the prestage area
-
Plug/connect all equipment based on client configuration
-
Run ID-specific programming to meet client configuration
-
Install software and/or client-defined image
-
Configure system and software
-
Test systems
-
Run diagnostics and customer-provided tests, including tests of input and output devices
-
Repackage components
-
Clearly label components
-
Perform asset tag management
-
Ship to locations per client instructions
On & Offsite Service
ATEK Communications service comes with a guarantee of quality and a commitment to support. Because we feel so strongly about professionally serving our clients, we offer on and offsite services designed to meet your needs:
Onsite-Project Management-IT Services-Installations
ATEK has available 24-hour, 7-days a week dispatching by field-trained support staff.
ATEK has professional, helpful technicians who arrive on time and in uniform.
ATEK provides customized software that allows you to monitor and document progress in real-time and at your convenience.
ATEK will provide Short- or long-term onsite IT Sevices and project management-that frees up your staff.
Offsite-Project Management-IT Services-Installations
ATEK has available 24-hour, 7-days a week dispatching by field-trained support staff.
ATEK's Help Desk services available- 24/7 services available.
ATEK's Level I support for immediate solutions on a remote basis.
ATEK's Level II support includes remote solutions and dispatched technicians.
ATEK's Level III support with a technician dispatched to your location.
ATEK's Level IV support with supervisory-management responsibilities.
Let our experienced project managers assist you in designing the right network.

*Information Technology: Call us at (866) 650-DATA
National Locations:
All
fiber optic cabling system designs are reviewed and installations quality checked
by a Registered Communications Distribution Designer (RCDD). This is a professional
designation of the Building Industry Consulting Services International (BICSI).
We ensure that the fiber optic cabling system design, components, and workmanship
comply with the standards and practices of BICSI. These standards and practices
are elaborated in the Telecommunications Distribution Methods Manual, the EIA/TIA
Telecommunications Building Wiring Standard, The National Fire Protection Assn.,
and the National Electrical Code (NFPA-70). Our fiber optic certifications, extensive
experience on fiber optics installation, and knowledge of fiber optic technologies
and standards are key factors in our successful delivery of fiber network solutions.
leading fiber optic suppliers. Together we can deliver the solution that best
meets your application needs, now and long term.

1***Network Cabling- Fiber Optics -Call
us at (866) 650-DATA or click the chat button at the top of the page
Our
Fiber Optic Services Include:
- Design
and Installation of Fiber Optic Cabling
- Design
and Installation of WDM-DWDB-CWDM- MRV Certified
- Fiber
Optic Termination
- Fiber
Optic Cable Installation
- OSP
Fiber Optic Cable Installation
- OSP
Aerial Fiber Optic Cable Installation
- Central
Office Fiber Optic Cable Installation
- Colo-
(Colocation) Fiber Optic Cable Installation
- Light
Interconnection Units and Fiber Shelves
- Testing and Certifications
- Fiber
Tray and Raceway
- Fiber
Innerduct
- Wall-mount
and Freestanding Cabinets and Racks
- Fiber
Optic Fusion and Mechanical Splicing
- Call us at (866) 650-DATA or (727) 547-2200 or click the chat button at the top of the page to talk to us
Our
certified RCDDs a nd LAN/WAN Specialists work closely with contractors and end
users to deliver the latest cabling technologies that best suit the needed applications
ATEK Communications, a proven data contractor can provide you with a complete set of
structured cabling installation services. With our ongoing training through BICSI
and our manufacturer partners, you are assured that our technicians adhere to
all the latest EIA/TIA standards. ATEK now also offers certified CISCO CCIE network
services.
This insures that you will get maximum bandwidth and
performance from your cable plant. Your network is only as good as your weakest
link. Remember that even if you have purchased the best cabling on the market
today, it doesn't guarantee that you will get maximum performance and throughput
that it was engineered for.
Your cabling must be installed by a technician
who understands and adheres to all the latest EIA/TIA standards. ATEK Communications
is a cabling contractor that is Leviton certified on structured cabling EIA-TIA
568 A&B Standards that provides structured cabling contracting services, network
design & installation, gigabit ethernet switch installation, smart home installations,cable
testing, telephone systems and Cisco CCIE network installations. See our
section on cabling standards.
|
|
New England
Services- Coming soon! |
|
California
Offices Northern CA (925) 944-0777
California
Offices Southern CA (213) 455-0578 or (619) 573-4164
Tampa
Bay - St. Pete Florida Offices (866) 650-DATA or (727) 547-2200

ATEK Communications, an established national data contractor and national data
integrator offers the federal government, local, state and county gobernments trained, experienced government cabling systems technicians along with design-build structured cabling contractors in the USA. We also provide security clearances if needed if required- please email or call is at (888) 909-ATEK.
From California to Florida to New York and Virginia you can be sure you be be provided the most experienced fiber cable installations, fiber testing, data cabling, IT support, VOIP phone and phone system providers and data cabling contractors
in the United States offering a multitude of data communications
services from design-build structured cabling infrastructure, LAN- WAN integration,
long haul fiber optic cable installation to IT support and
service. ATEK Communications has offices throughout the US offers competitive regional and local data cabling rates allows us to tailor cabling and installation rates to meet your needs. ATEK has fiber optic crews specializing in fiber optic installations. Our fiber technicians are trained in intricate fiber cable installations, fiber cable terminations , fiber cable fusion splicing services and FTTH- design -build services. We have on staff BICSI trained and certified RCDD's should you need one for certifications. We have very competitive rates for our fiber optic installers. ATEK Communications has several manufacturer data contractor certifications offer you and your company "end to end" solutions for several manufacturers. Call for details at (888) 909-ATEK.
SIC Code |
NAICS Code |
Description |
1623-12 |
23492 |
Telecommunications Wiring & Cabling |
1731 |
235990 |
Includes Cable splicing, electrical, construction contractors, Cable television hookup construction contractors, Communication equipment construction contractors, Computer cable construction contractors, Electrical construction contractors, Electrical repair construction contractors, Electronic control system construction contractors, Fiber optic cable construction contractors, Highway lighting and electrical signal construction contractors, Home automation system construction contractors, Lighting system construction contractors, Sound equipment construction contractors, Telecommunications wiring installation contractors |
1731-03 |
235310 |
Communications Specialization |
1731-27 |
235310 |
Communications Contractors |
3669-98 |
33429 |
Communications Equipment NEC - Manufacturers |
3679-01 |
33422 |
Radio and Television Broadcasting and Wireless Communications Equipment - Manufacturing |
4812 |
513322 |
Cellular and Other Wireless Telecommunications |
4813 |
|
Telephone Communications except radio |
4822-06 |
51331 |
Video Conferencing |
4899 |
|
Communications Services NEC |
4899-03 |
51339 |
Communications |
5065-10 |
42169 |
Telephone Equipment & Systems - Wholesale |
5065-14 |
42169 |
Intercommunication Equipment Systems/Service - Wholesale/Manufacturers |
5065-63 |
42169 |
Telecommunication Equipment & Systems - Wholesale/Mfg |
5734-02 |
44312 |
Computer Parts & Supplies |
5734-07 |
44312 |
Computer & Equipment Dealers |
5999-04 |
443112 |
Telephone Equipment & Supplies |
7378-04 |
811212 |
Computer Wiring |
7379-04 |
541512 |
Computers - Networking |
7382 |
|
Security Systems Services |
Divisions

Outside Plant Cable Testing And Cable Certificafication- More Info

|
Fiber Characterization FiberCertifications For New & Existing Cable Plant-More Info

|
Fiber Cable Testing and Certification For Commercial,Data Centers and Carriers-More Info

|
Das Wireless Services- More Info

|
|
National Telecommunications Roll Out Services- More Info 
|
|
ATEK Communications has recently teamed up with one of our national partners to roll out a 750 nursing home DAS wireless network. The fiber backbone was installed then ethernet sent to the nursing stations using media converters to CAT6 cable and to WAP's throughout the facilities. Please call (888) 909-ATEK for more information

|
Whether you require CAT 5e-CAT6 Cabling -Fiber Cabling-FIber Testing- Fusion Splicing - Emergency Restoration-Coax -Broadband cable for Tower Cell cabling to DAS Wireless to OSP- Outside Plant-Trenching and Directional Boring- We have technicians located throughout the USA that can do the project on time and on budget. We also have IT Cisco CCNA, RCDD's and phone system engineers on staff to help you.
We have local crews and can offer competitive rates to meets your financial needs. We will do our best to meet or beat all local rates offered by reputable companies.
Distributed Antenna Systems-Das Installation-Das Installers |
New Atlanta Location Serving The Southeast- Ask About Our Biometric Security Systems (866) 650-3282 or (727) 547-2200
|